dmesg - 1 x 8192 MB DDR3-1600MT

Return To 1 x 8192 MB DDR3-1600MT System Information

microcode: microcode updated early to revision 0x20, date = 2020-10-23
Linux version 5.8.0-63-generic (buildd@lgw01-amd64-035) (gcc (Ubuntu 9.3.0-17ubuntu1~20.04) 9.3.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #71~20.04.1-Ubuntu SMP Thu Jul 15 17:46:08 UTC 2021 (Ubuntu 5.8.0-63.71~20.04.1-generic 5.8.18)
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Hygon HygonGenuine
  Centaur CentaurHauls
  zhaoxin   Shanghai  
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
x86/fpu: xstate_offset[3]:  576, xstate_sizes[3]:   64
x86/fpu: xstate_offset[4]:  640, xstate_sizes[4]:   64
x86/fpu: Enabled xstate features 0x1b, context size is 704 bytes, using 'compacted' format.
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000003efff] usable
BIOS-e820: [mem 0x000000000003f000-0x000000000003ffff] reserved
BIOS-e820: [mem 0x0000000000040000-0x000000000009efff] usable
BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000000fffffff] usable
BIOS-e820: [mem 0x0000000010000000-0x0000000012150fff] reserved
BIOS-e820: [mem 0x0000000012151000-0x0000000075f3efff] usable
BIOS-e820: [mem 0x0000000075f3f000-0x0000000079a9efff] reserved
BIOS-e820: [mem 0x0000000079a9f000-0x0000000079b65fff] usable
BIOS-e820: [mem 0x0000000079b66000-0x0000000079e91fff] ACPI NVS
BIOS-e820: [mem 0x0000000079e92000-0x000000007a1fbfff] reserved
BIOS-e820: [mem 0x000000007a1fc000-0x000000007a569fff] usable
BIOS-e820: [mem 0x000000007a56a000-0x000000007a56afff] ACPI NVS
BIOS-e820: [mem 0x000000007a56b000-0x000000007a594fff] reserved
BIOS-e820: [mem 0x000000007a595000-0x000000007aae3fff] usable
BIOS-e820: [mem 0x000000007aae4000-0x000000007aae5fff] reserved
BIOS-e820: [mem 0x000000007aae6000-0x000000007affffff] usable
BIOS-e820: [mem 0x000000007b000000-0x000000007fffffff] reserved
BIOS-e820: [mem 0x00000000d0000000-0x00000000d0ffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fe042000-0x00000000fe044fff] reserved
BIOS-e820: [mem 0x00000000fe900000-0x00000000fe902fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000027fffffff] usable
NX (Execute Disable) protection: active
e820: update [mem 0x70aef018-0x70aff057] usable ==> usable
e820: update [mem 0x70aef018-0x70aff057] usable ==> usable
extended physical RAM map:
reserve setup_data: [mem 0x0000000000000000-0x000000000003efff] usable
reserve setup_data: [mem 0x000000000003f000-0x000000000003ffff] reserved
reserve setup_data: [mem 0x0000000000040000-0x000000000009efff] usable
reserve setup_data: [mem 0x000000000009f000-0x00000000000fffff] reserved
reserve setup_data: [mem 0x0000000000100000-0x000000000fffffff] usable
reserve setup_data: [mem 0x0000000010000000-0x0000000012150fff] reserved
reserve setup_data: [mem 0x0000000012151000-0x0000000070aef017] usable
reserve setup_data: [mem 0x0000000070aef018-0x0000000070aff057] usable
reserve setup_data: [mem 0x0000000070aff058-0x0000000075f3efff] usable
reserve setup_data: [mem 0x0000000075f3f000-0x0000000079a9efff] reserved
reserve setup_data: [mem 0x0000000079a9f000-0x0000000079b65fff] usable
reserve setup_data: [mem 0x0000000079b66000-0x0000000079e91fff] ACPI NVS
reserve setup_data: [mem 0x0000000079e92000-0x000000007a1fbfff] reserved
reserve setup_data: [mem 0x000000007a1fc000-0x000000007a569fff] usable
reserve setup_data: [mem 0x000000007a56a000-0x000000007a56afff] ACPI NVS
reserve setup_data: [mem 0x000000007a56b000-0x000000007a594fff] reserved
reserve setup_data: [mem 0x000000007a595000-0x000000007aae3fff] usable
reserve setup_data: [mem 0x000000007aae4000-0x000000007aae5fff] reserved
reserve setup_data: [mem 0x000000007aae6000-0x000000007affffff] usable
reserve setup_data: [mem 0x000000007b000000-0x000000007fffffff] reserved
reserve setup_data: [mem 0x00000000d0000000-0x00000000d0ffffff] reserved
reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
reserve setup_data: [mem 0x00000000fe042000-0x00000000fe044fff] reserved
reserve setup_data: [mem 0x00000000fe900000-0x00000000fe902fff] reserved
reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
reserve setup_data: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
reserve setup_data: [mem 0x0000000100000000-0x000000027fffffff] usable
efi: EFI v2.50 by American Megatrends
efi: ACPI=0x79e81000 ACPI 2.0=0x79e81000 ESRT=0x7a086858 SMBIOS=0xf05e0 SMBIOS 3.0=0xf0600 
secureboot: Secure boot disabled
SMBIOS 3.0.0 present.
DMI: PMB PMB/PMB, BIOS PMB-L03(B-Ver)-JETWAY 05/20/2021
tsc: Detected 1497.600 MHz processor
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x280000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-6FFFF write-back
  70000-7FFFF uncachable
  80000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 0000000000 mask 7F80000000 write-back
  1 base 007C000000 mask 7FFC000000 uncachable
  2 base 007B000000 mask 7FFF000000 uncachable
  3 base 0100000000 mask 7F00000000 write-back
  4 base 0200000000 mask 7F80000000 write-back
  5 base 00FF000000 mask 7FFF000000 write-combining
  6 base 0090000000 mask 7FF0000000 write-through
  7 base 00A0000000 mask 7FFE000000 write-through
  8 base 00A2000000 mask 7FFF800000 write-through
  9 disabled
x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
last_pfn = 0x7b000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fcc00-0x000fcc0f]
esrt: Reserving ESRT space from 0x000000007a086858 to 0x000000007a086890.
check: Scanning 1 areas for low memory corruption
Using GB pages for direct mapping
secureboot: Secure boot disabled
RAMDISK: [mem 0x3cc6b000-0x3fffdfff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x0000000079E81000 000024 (v02 JetWay)
ACPI: XSDT 0x0000000079E810B0 0000CC (v01 JetWay Em10xcPo 01072009 AMI  00010013)
ACPI: FACP 0x0000000079E89530 000114 (v06 JetWay Em10xcPo 01072009 AMI  00010013)
ACPI: DSDT 0x0000000079E81220 00830A (v02 JetWay Em10xcPo 01072009 INTL 20120913)
ACPI: FACS 0x0000000079E91080 000040
ACPI: FPDT 0x0000000079E89650 000044 (v01 JetWay Em10xcPo 01072009 AMI  00010013)
ACPI: FIDT 0x0000000079E896A0 00009C (v01 JetWay Em10xcPo 01072009 AMI  00010013)
ACPI: MCFG 0x0000000079E89740 00003C (v01 JetWay Em10xcPo 01072009 MSFT 00000097)
ACPI: DBG2 0x0000000079E89780 000072 (v00 INTEL  EDK2     00000003 BRXT 0100000D)
ACPI: DBGP 0x0000000079E89800 000034 (v01 INTEL  EDK2     00000003 BRXT 0100000D)
ACPI: HPET 0x0000000079E89840 000038 (v01 INTEL  EDK2     00000003 BRXT 0100000D)
ACPI: LPIT 0x0000000079E89880 00005C (v01 INTEL  EDK2     00000003 BRXT 0100000D)
ACPI: APIC 0x0000000079E898E0 000084 (v03 INTEL  EDK2     00000003 BRXT 0100000D)
ACPI: NPKT 0x0000000079E89970 000065 (v01 INTEL  EDK2     00000003 BRXT 0100000D)
ACPI: PRAM 0x0000000079E899E0 000030 (v01 INTEL  EDK2     00000003 BRXT 0100000D)
ACPI: WSMT 0x0000000079E89A10 000028 (v00 INTEL  EDK2     00000003 BRXT 0100000D)
ACPI: SSDT 0x0000000079E89A40 00002C (v01 Intel_ Platform 00001000 INTL 20120913)
ACPI: SSDT 0x0000000079E89A70 000442 (v02 PmRef  Cpu0Ist  00003000 INTL 20120913)
ACPI: SSDT 0x0000000079E89EC0 00072B (v02 CpuRef CpuSsdt  00003000 INTL 20120913)
ACPI: SSDT 0x0000000079E8A5F0 00032D (v02 PmRef  Cpu0Tst  00003000 INTL 20120913)
ACPI: SSDT 0x0000000079E8A920 00017C (v02 PmRef  ApTst    00003000 INTL 20120913)
ACPI: SSDT 0x0000000079E8AAA0 002CB4 (v02 SaSsdt SaSsdt   00003000 INTL 20120913)
ACPI: UEFI 0x0000000079E8D760 000042 (v01 JetWay Em10xcPo 00000000      00000000)
ACPI: DMAR 0x0000000079E8D7B0 0000A8 (v01 INTEL  EDK2     00000003 BRXT 0100000D)
ACPI: WDAT 0x0000000079E8D860 000104 (v01                 00000000      00000000)
ACPI: Reserving FACP table memory at [mem 0x79e89530-0x79e89643]
ACPI: Reserving DSDT table memory at [mem 0x79e81220-0x79e89529]
ACPI: Reserving FACS table memory at [mem 0x79e91080-0x79e910bf]
ACPI: Reserving FPDT table memory at [mem 0x79e89650-0x79e89693]
ACPI: Reserving FIDT table memory at [mem 0x79e896a0-0x79e8973b]
ACPI: Reserving MCFG table memory at [mem 0x79e89740-0x79e8977b]
ACPI: Reserving DBG2 table memory at [mem 0x79e89780-0x79e897f1]
ACPI: Reserving DBGP table memory at [mem 0x79e89800-0x79e89833]
ACPI: Reserving HPET table memory at [mem 0x79e89840-0x79e89877]
ACPI: Reserving LPIT table memory at [mem 0x79e89880-0x79e898db]
ACPI: Reserving APIC table memory at [mem 0x79e898e0-0x79e89963]
ACPI: Reserving NPKT table memory at [mem 0x79e89970-0x79e899d4]
ACPI: Reserving PRAM table memory at [mem 0x79e899e0-0x79e89a0f]
ACPI: Reserving WSMT table memory at [mem 0x79e89a10-0x79e89a37]
ACPI: Reserving SSDT table memory at [mem 0x79e89a40-0x79e89a6b]
ACPI: Reserving SSDT table memory at [mem 0x79e89a70-0x79e89eb1]
ACPI: Reserving SSDT table memory at [mem 0x79e89ec0-0x79e8a5ea]
ACPI: Reserving SSDT table memory at [mem 0x79e8a5f0-0x79e8a91c]
ACPI: Reserving SSDT table memory at [mem 0x79e8a920-0x79e8aa9b]
ACPI: Reserving SSDT table memory at [mem 0x79e8aaa0-0x79e8d753]
ACPI: Reserving UEFI table memory at [mem 0x79e8d760-0x79e8d7a1]
ACPI: Reserving DMAR table memory at [mem 0x79e8d7b0-0x79e8d857]
ACPI: Reserving WDAT table memory at [mem 0x79e8d860-0x79e8d963]
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000027fffffff]
NODE_DATA(0) allocated [mem 0x27ffd6000-0x27fffffff]
Zone ranges:
  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
  DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
  Normal   [mem 0x0000000100000000-0x000000027fffffff]
  Device   empty
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000001000-0x000000000003efff]
  node   0: [mem 0x0000000000040000-0x000000000009efff]
  node   0: [mem 0x0000000000100000-0x000000000fffffff]
  node   0: [mem 0x0000000012151000-0x0000000075f3efff]
  node   0: [mem 0x0000000079a9f000-0x0000000079b65fff]
  node   0: [mem 0x000000007a1fc000-0x000000007a569fff]
  node   0: [mem 0x000000007a595000-0x000000007aae3fff]
  node   0: [mem 0x000000007aae6000-0x000000007affffff]
  node   0: [mem 0x0000000100000000-0x000000027fffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000027fffffff]
On node 0 totalpages: 2051113
  DMA zone: 64 pages used for memmap
  DMA zone: 25 pages reserved
  DMA zone: 3997 pages, LIFO batch:0
  DMA zone: 28771 pages in unavailable ranges
  DMA32 zone: 7411 pages used for memmap
  DMA32 zone: 474252 pages, LIFO batch:63
  DMA32 zone: 45940 pages in unavailable ranges
  Normal zone: 24576 pages used for memmap
  Normal zone: 1572864 pages, LIFO batch:63
Reserving Intel graphics memory at [mem 0x7c000000-0x7fffffff]
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
TSC deadline timer available
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: hibernation: Registered nosave memory: [mem 0x0003f000-0x0003ffff]
PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff]
PM: hibernation: Registered nosave memory: [mem 0x10000000-0x12150fff]
PM: hibernation: Registered nosave memory: [mem 0x70aef000-0x70aeffff]
PM: hibernation: Registered nosave memory: [mem 0x70aff000-0x70afffff]
PM: hibernation: Registered nosave memory: [mem 0x75f3f000-0x79a9efff]
PM: hibernation: Registered nosave memory: [mem 0x79b66000-0x79e91fff]
PM: hibernation: Registered nosave memory: [mem 0x79e92000-0x7a1fbfff]
PM: hibernation: Registered nosave memory: [mem 0x7a56a000-0x7a56afff]
PM: hibernation: Registered nosave memory: [mem 0x7a56b000-0x7a594fff]
PM: hibernation: Registered nosave memory: [mem 0x7aae4000-0x7aae5fff]
PM: hibernation: Registered nosave memory: [mem 0x7b000000-0x7fffffff]
PM: hibernation: Registered nosave memory: [mem 0x80000000-0xcfffffff]
PM: hibernation: Registered nosave memory: [mem 0xd0000000-0xd0ffffff]
PM: hibernation: Registered nosave memory: [mem 0xd1000000-0xdfffffff]
PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xfe041fff]
PM: hibernation: Registered nosave memory: [mem 0xfe042000-0xfe044fff]
PM: hibernation: Registered nosave memory: [mem 0xfe045000-0xfe8fffff]
PM: hibernation: Registered nosave memory: [mem 0xfe900000-0xfe902fff]
PM: hibernation: Registered nosave memory: [mem 0xfe903000-0xfebfffff]
PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfed00fff]
PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed01fff]
PM: hibernation: Registered nosave memory: [mem 0xfed02000-0xfedfffff]
PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[mem 0x80000000-0xcfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
percpu: Embedded 56 pages/cpu s192512 r8192 d28672 u524288
pcpu-alloc: s192512 r8192 d28672 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 
Built 1 zonelists, mobility grouping on.  Total pages: 2019037
Policy zone: Normal
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
mem auto-init: stack:off, heap alloc:on, heap free:off
Memory: 7815424K/8204452K available (14339K kernel code, 2538K rwdata, 5456K rodata, 2648K init, 4912K bss, 389028K reserved, 0K cma-reserved)
random: get_random_u64 called from kmem_cache_open+0x29/0x410 with crng_init=0
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
ftrace: allocating 46483 entries in 182 pages
ftrace: allocated 182 pages with 5 groups
rcu: Hierarchical RCU implementation.
rcu: 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
	Trampoline variant of Tasks RCU enabled.
	Rude variant of Tasks RCU enabled.
	Tracing variant of Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16
random: crng done (trusting CPU's manufacturer)
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
printk: console [tty0] enabled
ACPI: Core revision 20200528
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 99544814920 ns
APIC: Switch to symmetric I/O mode setup
DMAR: Host address width 39
DMAR: DRHD base: 0x000000fed64000 flags: 0x0
DMAR: dmar0: reg_base_addr fed64000 ver 1:0 cap 1c0000c40660462 ecap 7e3ff0505e
DMAR: DRHD base: 0x000000fed65000 flags: 0x1
DMAR: dmar1: reg_base_addr fed65000 ver 1:0 cap d2008c40660462 ecap f050da
DMAR: RMRR base: 0x00000079a3a000 end: 0x00000079a59fff
DMAR: RMRR base: 0x0000007b800000 end: 0x0000007fffffff
DMAR-IR: IOAPIC id 1 under DRHD base  0xfed65000 IOMMU 1
DMAR-IR: HPET id 0 under DRHD base 0xfed65000
DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
DMAR-IR: Enabled IRQ remapping in x2apic mode
x2apic enabled
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x159647815e3, max_idle_ns: 440795269835 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 2995.20 BogoMIPS (lpj=5990400)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
Yama: becoming mindful.
AppArmor: AppArmor initialized
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
mce: CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Full generic retpoline
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : Enabling Restricted Speculation for firmware calls
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
Freeing SMP alternatives memory: 40K
smpboot: CPU0: Intel(R) Celeron(R) CPU J3455 @ 1.50GHz (family: 0x6, model: 0x5c, stepping: 0xa)
Performance Events: PEBS fmt3+, Goldmont events, 32-deep LBR, full-width counters, Intel PMU driver.
... version:                4
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             00007fffffffffff
... fixed-purpose events:   3
... event mask:             000000070000000f
rcu: Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node  #0, CPUs:      #1 #2 #3
smp: Brought up 1 node, 4 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 4 processors activated (11980.80 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0x79b66000-0x79e91fff] (3325952 bytes)
PM: Registering ACPI NVS region [mem 0x7a56a000-0x7a56afff] (4096 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
pinctrl core: initialized pinctrl subsystem
PM: RTC time: 08:07:26, date: 2021-07-27
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
thermal_sys: Registered thermal governor 'power_allocator'
NET: Registered protocol family 16
DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1627373245.048:1): state=initialized audit_enabled=0 res=1
EISA bus registered
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: 7 ACPI AML tables successfully acquired and loaded
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8DBA360BBA00 00015F (v02 PmRef  ApIst    00003000 INTL 20120913)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 14 GPEs in block 00 to 7F
ACPI: Power Resource [FN00] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME]
acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io  0x0070-0x0077]
pci_bus 0000:00: root bus resource [io  0x0000-0x006f window]
pci_bus 0000:00: root bus resource [io  0x0078-0x0cf7 window]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]
pci_bus 0000:00: root bus resource [mem 0x7c000001-0x7fffffff window]
pci_bus 0000:00: root bus resource [mem 0x7b800001-0x7bffffff window]
pci_bus 0000:00: root bus resource [mem 0x80000000-0xcfffffff window]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [8086:5af0] type 00 class 0x060000
pci 0000:00:02.0: [8086:5a85] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0x80000000-0x80ffffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0x90000000-0x9fffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
pci 0000:00:02.0: BAR 2: assigned to efifb
pci 0000:00:0e.0: [8086:5a98] type 00 class 0x040300
pci 0000:00:0e.0: reg 0x10: [mem 0x83910000-0x83913fff 64bit]
pci 0000:00:0e.0: reg 0x20: [mem 0x81000000-0x810fffff 64bit]
pci 0000:00:0e.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0f.0: [8086:5a9a] type 00 class 0x078000
pci 0000:00:0f.0: reg 0x10: [mem 0x83920000-0x83920fff 64bit]
pci 0000:00:0f.0: PME# supported from D3hot
pci 0000:00:11.0: [8086:5aa2] type 00 class 0x005007
pci 0000:00:11.0: reg 0x10: [mem 0x83916000-0x83917fff 64bit]
pci 0000:00:11.0: reg 0x18: [mem 0x8391d000-0x8391dfff 64bit]
pci 0000:00:12.0: [8086:5ae3] type 00 class 0x010601
pci 0000:00:12.0: reg 0x10: [mem 0x83914000-0x83915fff]
pci 0000:00:12.0: reg 0x14: [mem 0x8391c000-0x8391c0ff]
pci 0000:00:12.0: reg 0x18: [io  0xf090-0xf097]
pci 0000:00:12.0: reg 0x1c: [io  0xf080-0xf083]
pci 0000:00:12.0: reg 0x20: [io  0xf060-0xf07f]
pci 0000:00:12.0: reg 0x24: [mem 0x8391b000-0x8391b7ff]
pci 0000:00:12.0: PME# supported from D3hot
pci 0000:00:13.0: [8086:5ad8] type 01 class 0x060400
pci 0000:00:13.0: PME# supported from D0 D3hot D3cold
pci 0000:00:13.1: [8086:5ad9] type 01 class 0x060400
pci 0000:00:13.1: PME# supported from D0 D3hot D3cold
pci 0000:00:13.2: [8086:5ada] type 01 class 0x060400
pci 0000:00:13.2: PME# supported from D0 D3hot D3cold
pci 0000:00:13.3: [8086:5adb] type 01 class 0x060400
pci 0000:00:13.3: PME# supported from D0 D3hot D3cold
pci 0000:00:14.0: [8086:5ad6] type 01 class 0x060400
pci 0000:00:14.0: PME# supported from D0 D3hot D3cold
pci 0000:00:14.1: [8086:5ad7] type 01 class 0x060400
pci 0000:00:14.1: PME# supported from D0 D3hot D3cold
pci 0000:00:15.0: [8086:5aa8] type 00 class 0x0c0330
pci 0000:00:15.0: reg 0x10: [mem 0x83900000-0x8390ffff 64bit]
pci 0000:00:15.0: PME# supported from D3hot D3cold
pci 0000:00:1c.0: [8086:5acc] type 00 class 0x080501
pci 0000:00:1c.0: reg 0x10: [mem 0x8391a000-0x8391afff 64bit]
pci 0000:00:1c.0: reg 0x18: [mem 0x83919000-0x83919fff 64bit]
pci 0000:00:1f.0: [8086:5ae8] type 00 class 0x060100
pci 0000:00:1f.1: [8086:5ad4] type 00 class 0x0c0500
pci 0000:00:1f.1: reg 0x10: [mem 0x83918000-0x839180ff 64bit]
pci 0000:00:1f.1: reg 0x20: [io  0xf040-0xf05f]
pci 0000:00:13.0: PCI bridge to [bus 01]
pci 0000:00:13.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:13.0:   bridge window [mem 0x82f00000-0x838fffff]
pci 0000:00:13.0:   bridge window [mem 0xa1e00000-0xa27fffff 64bit pref]
pci 0000:00:13.1: PCI bridge to [bus 02]
pci 0000:00:13.1:   bridge window [io  0xd000-0xdfff]
pci 0000:00:13.1:   bridge window [mem 0x82500000-0x82efffff]
pci 0000:00:13.1:   bridge window [mem 0xa1400000-0xa1dfffff 64bit pref]
pci 0000:03:00.0: [8086:1539] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [mem 0x81b00000-0x81b1ffff]
pci 0000:03:00.0: reg 0x18: [io  0xc000-0xc01f]
pci 0000:03:00.0: reg 0x1c: [mem 0x81b20000-0x81b23fff]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:13.2: PCI bridge to [bus 03]
pci 0000:00:13.2:   bridge window [io  0xc000-0xcfff]
pci 0000:00:13.2:   bridge window [mem 0x81b00000-0x824fffff]
pci 0000:00:13.2:   bridge window [mem 0xa0a00000-0xa13fffff 64bit pref]
pci 0000:00:13.3: PCI bridge to [bus 04]
pci 0000:00:13.3:   bridge window [io  0xb000-0xbfff]
pci 0000:00:13.3:   bridge window [mem 0x81100000-0x81afffff]
pci 0000:00:13.3:   bridge window [mem 0xa0000000-0xa09fffff 64bit pref]
pci 0000:00:14.0: PCI bridge to [bus 05]
pci 0000:00:14.1: PCI bridge to [bus 06]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
iommu: Default domain type: Translated 
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:00:02.0: vgaarb: setting as boot VGA device
pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:00:02.0: vgaarb: bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
PTP clock support registered
EDAC MC: Ver: 3.0.0
Registered efivars operations
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel:  unlabeled traffic allowed by default
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0003f000-0x0003ffff]
e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
e820: reserve RAM buffer [mem 0x70aef018-0x73ffffff]
e820: reserve RAM buffer [mem 0x75f3f000-0x77ffffff]
e820: reserve RAM buffer [mem 0x79b66000-0x7bffffff]
e820: reserve RAM buffer [mem 0x7a56a000-0x7bffffff]
e820: reserve RAM buffer [mem 0x7aae4000-0x7bffffff]
e820: reserve RAM buffer [mem 0x7b000000-0x7bffffff]
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 19.200000 MHz counter
clocksource: Switched to clocksource tsc-early
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io  0x0a00-0x0a0f] has been reserved
system 00:00: [io  0x0a10-0x0a1f] has been reserved
system 00:00: [io  0x0a20-0x0a2f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: [dma 0 disabled]
pnp 00:01: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:02: [dma 0 disabled]
pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0f13 (active)
system 00:05: [io  0x0680-0x069f] has been reserved
system 00:05: [io  0x0400-0x047f] could not be reserved
system 00:05: [io  0x0500-0x05fe] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
system 00:06: [mem 0xfea00000-0xfeafffff] has been reserved
system 00:06: [mem 0xfed01000-0xfed01fff] has been reserved
system 00:06: [mem 0xfed03000-0xfed03fff] has been reserved
system 00:06: [mem 0xfed06000-0xfed06fff] has been reserved
system 00:06: [mem 0xfed08000-0xfed09fff] has been reserved
system 00:06: [mem 0xfed80000-0xfedbffff] has been reserved
system 00:06: [mem 0xfed1c000-0xfed1cfff] has been reserved
system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp: PnP ACPI: found 8 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
NET: Registered protocol family 2
IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
NET: Registered protocol family 1
NET: Registered protocol family 44
pci 0000:00:13.0: PCI bridge to [bus 01]
pci 0000:00:13.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:13.0:   bridge window [mem 0x82f00000-0x838fffff]
pci 0000:00:13.0:   bridge window [mem 0xa1e00000-0xa27fffff 64bit pref]
pci 0000:00:13.1: PCI bridge to [bus 02]
pci 0000:00:13.1:   bridge window [io  0xd000-0xdfff]
pci 0000:00:13.1:   bridge window [mem 0x82500000-0x82efffff]
pci 0000:00:13.1:   bridge window [mem 0xa1400000-0xa1dfffff 64bit pref]
pci 0000:00:13.2: PCI bridge to [bus 03]
pci 0000:00:13.2:   bridge window [io  0xc000-0xcfff]
pci 0000:00:13.2:   bridge window [mem 0x81b00000-0x824fffff]
pci 0000:00:13.2:   bridge window [mem 0xa0a00000-0xa13fffff 64bit pref]
pci 0000:00:13.3: PCI bridge to [bus 04]
pci 0000:00:13.3:   bridge window [io  0xb000-0xbfff]
pci 0000:00:13.3:   bridge window [mem 0x81100000-0x81afffff]
pci 0000:00:13.3:   bridge window [mem 0xa0000000-0xa09fffff 64bit pref]
pci 0000:00:14.0: PCI bridge to [bus 05]
pci 0000:00:14.1: PCI bridge to [bus 06]
pci_bus 0000:00: resource 4 [io  0x0070-0x0077]
pci_bus 0000:00: resource 5 [io  0x0000-0x006f window]
pci_bus 0000:00: resource 6 [io  0x0078-0x0cf7 window]
pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window]
pci_bus 0000:00: resource 11 [mem 0x7c000001-0x7fffffff window]
pci_bus 0000:00: resource 12 [mem 0x7b800001-0x7bffffff window]
pci_bus 0000:00: resource 13 [mem 0x80000000-0xcfffffff window]
pci_bus 0000:00: resource 14 [mem 0xe0000000-0xefffffff window]
pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0x82f00000-0x838fffff]
pci_bus 0000:01: resource 2 [mem 0xa1e00000-0xa27fffff 64bit pref]
pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0x82500000-0x82efffff]
pci_bus 0000:02: resource 2 [mem 0xa1400000-0xa1dfffff 64bit pref]
pci_bus 0000:03: resource 0 [io  0xc000-0xcfff]
pci_bus 0000:03: resource 1 [mem 0x81b00000-0x824fffff]
pci_bus 0000:03: resource 2 [mem 0xa0a00000-0xa13fffff 64bit pref]
pci_bus 0000:04: resource 0 [io  0xb000-0xbfff]
pci_bus 0000:04: resource 1 [mem 0x81100000-0x81afffff]
pci_bus 0000:04: resource 2 [mem 0xa0000000-0xa09fffff 64bit pref]
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 52812K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0x6caee000-0x70aee000] (64MB)
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x159647815e3, max_idle_ns: 440795269835 ns
clocksource: Switched to clocksource tsc
check: Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=21 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse: init (API version 7.31)
integrity: Platform Keyring initialized
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
io scheduler mq-deadline registered
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
efifb: probing for efifb
efifb: No BGRT, not showing boot graphics
efifb: framebuffer at 0x90000000, using 1876k, total 1875k
efifb: mode is 800x600x32, linelength=3200, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
fbcon: Deferring console take-over
fb0: EFI VGA frame buffer device
intel_idle: Please enable MWAIT in BIOS SETUP
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (41 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (27 C)
00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 921600) is a 16550A
00:02: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 921600) is a 16550A
Linux agpgart interface v0.103
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
VFIO - User Level meta-driver version: 0.3
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:07: RTC can wake from S4
rtc_cmos 00:07: registered as rtc0
rtc_cmos 00:07: setting system clock to 2021-07-27T08:07:26 UTC (1627373246)
rtc_cmos 00:07: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.42.0-ioctl (2020-02-27) initialised: dm-devel@redhat.com
platform eisa.0: Probing EISA bus 0
platform eisa.0: EISA: Cannot allocate resource for mainboard
platform eisa.0: Cannot allocate resource for EISA slot 1
platform eisa.0: Cannot allocate resource for EISA slot 2
platform eisa.0: Cannot allocate resource for EISA slot 3
platform eisa.0: Cannot allocate resource for EISA slot 4
platform eisa.0: Cannot allocate resource for EISA slot 5
platform eisa.0: Cannot allocate resource for EISA slot 6
platform eisa.0: Cannot allocate resource for EISA slot 7
platform eisa.0: Cannot allocate resource for EISA slot 8
platform eisa.0: EISA: Detected 0 cards
intel_pstate: Intel P-state driver initializing
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
drop_monitor: Initializing network drop monitor service
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
microcode: sig=0x506ca, pf=0x1, revision=0x20
microcode: Microcode Update Driver: v2.2.
resctrl: L2 allocation detected
IPI shorthand broadcast: enabled
sched_clock: Marking stable (861233582, 851410)->(866574214, -4489222)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 6af17e88d143a5e927cc9982b97b8e933a9d694e'
Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969'
Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19'
zswap: loaded using pool lzo/zbud
Key type ._fscrypt registered
Key type .fscrypt registered
Key type fscrypt-provisioning registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
integrity: Loading X.509 certificate: UEFI:MokListRT
integrity: Loaded X.509 cert 'SomeOrg: shim: a01ee84e9b37ace407961cc468c5909447878469'
integrity: Loading X.509 certificate: UEFI:MokListRT
integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63'
ima: No TPM chip found, activating TPM-bypass!
ima: Allocated hash algorithm: sha1
ima: No architecture policies found
evm: Initialising EVM extended attributes:
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.apparmor
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
PM:   Magic number: 13:945:119
RAS: Correctable Errors collector initialized.
Freeing unused decrypted memory: 2040K
Freeing unused kernel image (initmem) memory: 2648K
Write protecting the kernel read-only data: 22528k
Freeing unused kernel image (text/rodata gap) memory: 2044K
Freeing unused kernel image (rodata/data gap) memory: 688K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
Run /init as init process
  with arguments:
    /init
    splash
  with environment:
    HOME=/
    TERM=linux
    BOOT_IMAGE=/boot/vmlinuz-5.8.0-63-generic
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
xhci_hcd 0000:00:15.0: xHCI Host Controller
xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 1
dca service started, version 1.12.1
sdhci-pci 0000:00:1c.0: SDHCI controller found [8086:5acc] (rev d)
intel_ish_ipc 0000:00:11.0: enabling device (0000 -> 0002)
ahci 0000:00:12.0: version 3.0
ahci 0000:00:12.0: SSS flag set, parallel bus scan disabled
mmc0: SDHCI controller on PCI [0000:00:1c.0] using ADMA 64-bit
xhci_hcd 0000:00:15.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000081109810
xhci_hcd 0000:00:15.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 5.8.0-63-generic xhci-hcd
usb usb1: SerialNumber: 0000:00:15.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
xhci_hcd 0000:00:15.0: xHCI Host Controller
xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:00:15.0: Host supports USB 3.0 SuperSpeed
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.08
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 5.8.0-63-generic xhci-hcd
usb usb2: SerialNumber: 0000:00:15.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 7 ports detected
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.6.0-k
igb: Copyright (c) 2007-2014 Intel Corporation.
i801_smbus 0000:00:1f.1: SPD Write Disable is set
i801_smbus 0000:00:1f.1: SMBus using PCI interrupt
i2c i2c-0: 1/2 memory slots populated (from DMI)
i2c i2c-0: Successfully instantiated SPD at 0x50
ahci 0000:00:12.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
ahci 0000:00:12.0: flags: 64bit ncq sntf stag pm clo only pmp pio slum part deso sadm sds apst 
scsi host0: ahci
ata1: SATA max UDMA/133 abar m2048@0x8391b000 port 0x8391b100 irq 128
pps pps0: new PPS source ptp0
igb 0000:03:00.0: added PHC on eth0
igb 0000:03:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:03:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 00:30:18:28:21:1a
igb 0000:03:00.0: eth0: PBA No: FFFFFF-0FF
igb 0000:03:00.0: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s)
igb 0000:03:00.0 enp3s0: renamed from eth0
usb 1-6: new high-speed USB device number 2 using xhci_hcd
usb 1-6: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=60.70
usb 1-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-6: Product: USB2.0 Hub
hub 1-6:1.0: USB hub found
hub 1-6:1.0: 4 ports detected
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ATA-11: SanDisk SD9SB8W128G, X6107000, max UDMA/133
ata1.00: 250069680 sectors, multi 1: LBA48 NCQ (depth 32), AA
ata1.00: configured for UDMA/133
ahci 0000:00:12.0: port does not support device sleep
scsi 0:0:0:0: Direct-Access     ATA      SanDisk SD9SB8W1 7000 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
usb 1-7: new high-speed USB device number 3 using xhci_hcd
hid: raw HID events driver (C) Jiri Kosina
ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=4
hid-generic 001F:8087:0AC2.0001: hidraw0:  HID v2.00 Device [hid-ishtp 8087:0AC2] on 
hid-generic 001F:8087:0AC2.0002: hidraw1:  HID v2.00 Device [hid-ishtp 8087:0AC2] on 
hid-generic 001F:8087:0AC2.0003: hidraw2:  HID v2.00 Device [hid-ishtp 8087:0AC2] on 
hid-generic 001F:8087:0AC3.0004: hidraw3:  HID v2.00 Device [hid-ishtp 8087:0AC3] on 
usb 1-7: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=60.70
usb 1-7: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-7: Product: USB2.0 Hub
hub 1-7:1.0: USB hub found
hub 1-7:1.0: 4 ports detected
usb 1-6.1: new low-speed USB device number 4 using xhci_hcd
usb 1-6.1: New USB device found, idVendor=093a, idProduct=2510, bcdDevice= 1.00
usb 1-6.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-6.1: Product: USB Optical Mouse
usb 1-6.1: Manufacturer: PixArt
usb 1-8: new high-speed USB device number 5 using xhci_hcd
usb 1-8: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=60.70
usb 1-8: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-8: Product: USB2.0 Hub
hub 1-8:1.0: USB hub found
hub 1-8:1.0: 4 ports detected
usb 1-6.2: new low-speed USB device number 6 using xhci_hcd
usb 1-6.2: New USB device found, idVendor=c0f4, idProduct=01b0, bcdDevice= 1.10
usb 1-6.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-6.2: Product: usb keyboard
usb 1-6.2: Manufacturer: USB
input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:15.0/usb1/1-6/1-6.1/1-6.1:1.0/0003:093A:2510.0005/input/input4
hid-generic 0003:093A:2510.0005: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:15.0-6.1/input0
input: USB usb keyboard as /devices/pci0000:00/0000:00:15.0/usb1/1-6/1-6.2/1-6.2:1.0/0003:C0F4:01B0.0006/input/input5
usb 1-7.4: new full-speed USB device number 7 using xhci_hcd
hid-generic 0003:C0F4:01B0.0006: input,hidraw1: USB HID v1.10 Keyboard [USB usb keyboard] on usb-0000:00:15.0-6.2/input0
input: USB usb keyboard Consumer Control as /devices/pci0000:00/0000:00:15.0/usb1/1-6/1-6.2/1-6.2:1.1/0003:C0F4:01B0.0007/input/input6
input: USB usb keyboard System Control as /devices/pci0000:00/0000:00:15.0/usb1/1-6/1-6.2/1-6.2:1.1/0003:C0F4:01B0.0007/input/input7
hid-generic 0003:C0F4:01B0.0007: input,hidraw2: USB HID v1.10 Device [USB usb keyboard] on usb-0000:00:15.0-6.2/input1
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usb 1-7.4: New USB device found, idVendor=222a, idProduct=0001, bcdDevice= 0.02
usb 1-7.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-7.4: Product: ILITEK-TP
usb 1-7.4: Manufacturer: ILITEK
input: ILITEK ILITEK-TP Touchscreen as /devices/pci0000:00/0000:00:15.0/usb1/1-7/1-7.4/1-7.4:1.0/0003:222A:0001.0008/input/input8
input: ILITEK ILITEK-TP Mouse as /devices/pci0000:00/0000:00:15.0/usb1/1-7/1-7.4/1-7.4:1.0/0003:222A:0001.0008/input/input10
hid-generic 0003:222A:0001.0008: input,hiddev0,hidraw3: USB HID v1.10 Mouse [ILITEK ILITEK-TP] on usb-0000:00:15.0-7.4/input0
fbcon: Taking over console
Console: switching to colour frame buffer device 100x37
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: Inserted module 'autofs4'
systemd[1]: systemd 245.4-4ubuntu3.11 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: /etc/systemd/system/anydesk.service:9: PIDFile= references a path below legacy directory /var/run/, updating /var/run/anydesk.pid → /run/anydesk.pid; please update the unit file accordingly.
systemd[1]: Created slice system-modprobe.slice.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Reached target Slices.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Starting Journal Service...
systemd[1]: Starting Set the console keyboard layout...
systemd[1]: Starting Create list of static device nodes for the current kernel...
systemd[1]: Starting Load Kernel Module drm...
systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Kernel Debug File System.
systemd[1]: Mounted Kernel Trace File System.
systemd[1]: Finished Create list of static device nodes for the current kernel.
EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
systemd[1]: modprobe@drm.service: Succeeded.
systemd[1]: Finished Load Kernel Module drm.
systemd[1]: Finished Remount Root and Kernel File Systems.
systemd[1]: Finished Uncomplicated firewall.
systemd[1]: Activating swap /swapfile...
systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
systemd[1]: Starting Load/Save Random Seed...
systemd[1]: Starting Create System Users...
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
systemd[1]: Finished Load Kernel Modules.
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Mounting Kernel Configuration File System...
systemd[1]: Starting Apply Kernel Variables...
Adding 2097148k swap on /swapfile.  Priority:-2 extents:6 across:2260988k SSFS
systemd[1]: Activated swap /swapfile.
systemd[1]: Finished Load/Save Random Seed.
systemd[1]: Mounted FUSE Control File System.
systemd[1]: Finished Create System Users.
systemd[1]: Mounted Kernel Configuration File System.
systemd[1]: Reached target Swap.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Finished Apply Kernel Variables.
systemd[1]: Finished Create Static Device Nodes in /dev.
systemd[1]: Starting udev Kernel Device Manager...
systemd[1]: Finished Set the console keyboard layout.
systemd[1]: Reached target Local File Systems (Pre).
systemd[1]: Mounting Mount unit for core18, revision 1988...
systemd[1]: Mounting Mount unit for core18, revision 2074...
systemd[1]: Mounting Mount unit for gnome-3-34-1804, revision 66...
systemd[1]: Mounting Mount unit for gnome-3-34-1804, revision 72...
systemd[1]: Mounting Mount unit for gtk-common-themes, revision 1514...
systemd[1]: Mounting Mount unit for gtk-common-themes, revision 1515...
systemd[1]: Mounting Mount unit for snap-store, revision 518...
systemd[1]: Mounting Mount unit for snap-store, revision 547...
systemd[1]: Mounting Mount unit for snapd, revision 11036...
systemd[1]: Mounting Mount unit for snapd, revision 12398...
systemd[1]: Started Journal Service.
systemd-journald[259]: Received client request to flush runtime journal.
pstore: Using crash dump compression: deflate
pstore: Registered efi as persistent store backend
at24 0-0050: supply vcc not found, using dummy regulator
at24 0-0050: 256 byte spd EEPROM, read-only
RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-14 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
cryptd: max_cpu_qlen set to 1000
SSE version of gcm_enc/dec engaged.
checking generic (90000000 1d5000) vs hw (80000000 1000000)
checking generic (90000000 1d5000) vs hw (90000000 10000000)
fb0: switching to inteldrmfb from EFI VGA
Console: switching to colour dummy device 80x25
i915 0000:00:02.0: vgaarb: deactivate vga console
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/bxt_dmc_ver1_07.bin (v1.7)
input: ILITEK ILITEK-TP as /devices/pci0000:00/0000:00:15.0/usb1/1-7/1-7.4/1-7.4:1.0/0003:222A:0001.0008/input/input11
input: ILITEK ILITEK-TP Mouse as /devices/pci0000:00/0000:00:15.0/usb1/1-7/1-7.4/1-7.4:1.0/0003:222A:0001.0008/input/input13
hid-multitouch 0003:222A:0001.0008: input,hiddev0,hidraw3: USB HID v1.10 Mouse [ILITEK ILITEK-TP] on usb-0000:00:15.0-7.4/input0
EDAC pnd2: b_cr_tolud_pci=080000001 ret=0
EDAC pnd2: b_cr_touud_lo_pci=080000000 ret=0
EDAC pnd2: b_cr_touud_hi_pci=000000002 ret=0
EDAC pnd2: b_cr_asym_mem_region0_mchbar=000000000 ret=0
EDAC pnd2: b_cr_asym_mem_region1_mchbar=000000000 ret=0
EDAC pnd2: b_cr_mot_out_base_mchbar=000000000 ret=0
EDAC pnd2: b_cr_mot_out_mask_mchbar=000000000 ret=0
EDAC pnd2: b_cr_slice_channel_hash=8000000480000001 ret=0
EDAC pnd2: b_cr_asym_2way_mem_region_mchbar=000000000 ret=0
EDAC pnd2: d_cr_drp0=0c000c007 ret=0
EDAC pnd2: d_cr_drp0=000000000 ret=2
EDAC pnd2: d_cr_drp0=000000000 ret=2
EDAC pnd2: d_cr_drp0=000000000 ret=2
EDAC pnd2: ECC disabled on channel 0
EDAC pnd2: Failed to register device with error -22.
EDAC pnd2: b_cr_tolud_pci=080000001 ret=0
EDAC pnd2: b_cr_touud_lo_pci=080000000 ret=0
EDAC pnd2: b_cr_touud_hi_pci=000000002 ret=0
EDAC pnd2: b_cr_asym_mem_region0_mchbar=000000000 ret=0
EDAC pnd2: b_cr_asym_mem_region1_mchbar=000000000 ret=0
EDAC pnd2: b_cr_mot_out_base_mchbar=000000000 ret=0
EDAC pnd2: b_cr_mot_out_mask_mchbar=000000000 ret=0
EDAC pnd2: b_cr_slice_channel_hash=8000000480000001 ret=0
EDAC pnd2: b_cr_asym_2way_mem_region_mchbar=000000000 ret=0
EDAC pnd2: d_cr_drp0=0c000c007 ret=0
EDAC pnd2: d_cr_drp0=000000000 ret=2
EDAC pnd2: d_cr_drp0=000000000 ret=2
EDAC pnd2: d_cr_drp0=000000000 ret=2
EDAC pnd2: ECC disabled on channel 0
EDAC pnd2: Failed to register device with error -22.
intel_telemetry_core Init
EDAC pnd2: b_cr_tolud_pci=080000001 ret=0
EDAC pnd2: b_cr_touud_lo_pci=080000000 ret=0
EDAC pnd2: b_cr_touud_hi_pci=000000002 ret=0
EDAC pnd2: b_cr_asym_mem_region0_mchbar=000000000 ret=0
EDAC pnd2: b_cr_asym_mem_region1_mchbar=000000000 ret=0
EDAC pnd2: b_cr_mot_out_base_mchbar=000000000 ret=0
EDAC pnd2: b_cr_mot_out_mask_mchbar=000000000 ret=0
EDAC pnd2: b_cr_slice_channel_hash=8000000480000001 ret=0
EDAC pnd2: b_cr_asym_2way_mem_region_mchbar=000000000 ret=0
EDAC pnd2: d_cr_drp0=0c000c007 ret=0
EDAC pnd2: d_cr_drp0=000000000 ret=2
EDAC pnd2: d_cr_drp0=000000000 ret=2
EDAC pnd2: d_cr_drp0=000000000 ret=2
EDAC pnd2: ECC disabled on channel 0
EDAC pnd2: Failed to register device with error -22.
Invalid pltconfig, ensure IPC1 device is enabled in BIOS
EDAC pnd2: b_cr_tolud_pci=080000001 ret=0
EDAC pnd2: b_cr_touud_lo_pci=080000000 ret=0
EDAC pnd2: b_cr_touud_hi_pci=000000002 ret=0
EDAC pnd2: b_cr_asym_mem_region0_mchbar=000000000 ret=0
EDAC pnd2: b_cr_asym_mem_region1_mchbar=000000000 ret=0
EDAC pnd2: b_cr_mot_out_base_mchbar=000000000 ret=0
EDAC pnd2: b_cr_mot_out_mask_mchbar=000000000 ret=0
EDAC pnd2: b_cr_slice_channel_hash=8000000480000001 ret=0
EDAC pnd2: b_cr_asym_2way_mem_region_mchbar=000000000 ret=0
EDAC pnd2: d_cr_drp0=0c000c007 ret=0
EDAC pnd2: d_cr_drp0=000000000 ret=2
EDAC pnd2: d_cr_drp0=000000000 ret=2
EDAC pnd2: d_cr_drp0=000000000 ret=2
EDAC pnd2: ECC disabled on channel 0
EDAC pnd2: Failed to register device with error -22.
Invalid pltconfig, ensure IPC1 device is enabled in BIOS
Invalid pltconfig, ensure IPC1 device is enabled in BIOS
intel_rapl_common: Found RAPL domain package
intel_rapl_common: Found RAPL domain core
intel_rapl_common: Found RAPL domain uncore
intel_rapl_common: Found RAPL domain dram
Invalid pltconfig, ensure IPC1 device is enabled in BIOS
audit: type=1400 audit(1627373251.123:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=492 comm="apparmor_parser"
audit: type=1400 audit(1627373251.127:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=489 comm="apparmor_parser"
audit: type=1400 audit(1627373251.131:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ippusbxd" pid=494 comm="apparmor_parser"
audit: type=1400 audit(1627373251.143:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=493 comm="apparmor_parser"
audit: type=1400 audit(1627373251.143:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=493 comm="apparmor_parser"
audit: type=1400 audit(1627373251.143:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=493 comm="apparmor_parser"
audit: type=1400 audit(1627373251.143:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/{,usr/}sbin/dhclient" pid=493 comm="apparmor_parser"
audit: type=1400 audit(1627373251.143:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=490 comm="apparmor_parser"
audit: type=1400 audit(1627373251.143:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=490 comm="apparmor_parser"
audit: type=1400 audit(1627373251.143:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=490 comm="apparmor_parser"
[drm] Initialized i915 1.6.0 20200515 for 0000:00:02.0 on minor 0
ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input14
snd_hda_intel 0000:00:0e.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
fbcon: i915drmfb (fb0) is primary device
Console: switching to colour frame buffer device 170x48
i915 0000:00:02.0: fb0: i915drmfb frame buffer device
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC888-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0:    hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0:    inputs:
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input15
input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input16
input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input17
input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input18
input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input19
process '/usr/bin/anydesk' started with executable stack
igb 0000:03:00.0 enp3s0: igb: enp3s0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
rfkill: input handler disabled
perf: interrupt took too long (2532 > 2500), lowering kernel.perf_event_max_sample_rate to 78750
perf: interrupt took too long (3182 > 3165), lowering kernel.perf_event_max_sample_rate to 62750
perf: interrupt took too long (3994 > 3977), lowering kernel.perf_event_max_sample_rate to 50000
perf: interrupt took too long (4995 > 4992), lowering kernel.perf_event_max_sample_rate to 40000
perf: interrupt took too long (6245 > 6243), lowering kernel.perf_event_max_sample_rate to 32000
perf: interrupt took too long (7938 > 7806), lowering kernel.perf_event_max_sample_rate to 25000
perf: interrupt took too long (9941 > 9922), lowering kernel.perf_event_max_sample_rate to 20000

Return To 1 x 8192 MB DDR3-1600MT System Information